GEFEN CAT muunnin - 4K Ultra HD Multi-Format 2x1 HDBaseT Wall-Plate Sender w/Scaler, Auto-Switching,
Hinnat näkyvät vain verkkokauppaan kirjautuneille käyttäjille.
|
|
GEFEN CAT muunnin - 4K Ultra HD Multi-Format 2x1 HDBaseT Wall-Plate Sender w/Scaler, Auto-Switching,
Tuotekoodi:
EXT-UHDV-WP-HBTLS-TX
4K Ultra HD Multi-Format 2x1 HDBaseT Wall-Plate Sender w/Scaler, Auto-Switching,
|
4K Ultra HD Multi-Format 2×1 HDBaseT Wall-Plate Sender w/ Scaler, Auto-Switching, and POH
EXT-UHDV-WP-HBTLS-TX
Auto-Switch 4K Ultra HD HDMI and VGA, scale, and extend up to 70 meters/230 feet, over a single CAT-5
The Gefen EXT-UHDV-WP-HBTLS-TX is a highperformance solution in standard US electrical
wall-plate form factor for switching 4K Ultra
HD HDMI and VGA inputs, and extending them
up to 70 meters (230 feet) at 1080p and 40
meters (130 feet) at 4K, over a single CAT5e cable. Switching between the HDMI and
VGA can be set to Automatic or be done
manually via the front panel button or RS-232.
It supports 10.2 Gbps of data throughput and
300 MHz TMDS Clock frequency, accepting
HDMI 2.0 signals up to 4K 60 Hz 4:2:0 or
4K 30 Hz 4:4:4. This extender uses Gefen’s
implementation of the HDBaseT™ technology
with enhancements such as Advanced EDID
Management. The HDMI input accommodates
resolutions up to 4K Cinema-DCI (4096 x 2160
to 30 Hz 4:4:4) and 4K Ultra HD (3860 x 2160
to 60 Hz, 4:2:0, or 30 Hz 4:4:4), with HDCP
1.4. Highest performance multichannel digital
audio including 7.1 channels of LPCM and HBR
(High Bit Rate) digital audio formats, such as
Dolby Atmos®, Dolby® TrueHD, DTS:X™, and
DTS-HD Master Audio™ are passed through
to the HDMI output. The VGA input features a
companion L/R analog audio input, and accepts
VESA and CEA resolutions up to WUXGA (1920
x 1200 to 60 Hz, 4:4:4) and 1080p Full HD
(1920 x 1080 at 60 Hz, 4:4:4). A powerful builtin scaler can upscale lower resolution VGA
signals with legacy aspect ratio to widescreen
WUXGA, ensuring stunning presentations and
smooth switching transitions between the HDMI
and the VGA sources. The EXT-UHDV-WPHBTLS-TX extends RS-232 when used with
a compatible Receiver unit such as the Gefen
EXT-UHDA-HBTL-RX, facilitating the control
of A/V sources placed near the Sender from
the viewing location, and sending automation
commands to the display or another device
placed near the Receiver unit. It also accepts
RS-232 commands for switching, scaler
controls, and EDID management from a thirdparty controller placed near the Sender or
remotely by the Receiver. HDBaseT™ standard
POH (Power Over HDBaseT™) technology
powers the Sender remotely from the Receiver
unit, using the same cable that extends the
HDMI signal. This feature simplifies installation
in many cases where supplying power directly
to the wall-plate is not practical. Alternatively,
if powering the wall-plate Sender from the
Receiver unit is not feasible, a separately
available power supply can be hard-wired to a
detachable “captive-screw” Phoenix connector
on the back of the wall-plate. The Sender
uses the North American standard 2-gang
wall-plate form factor and can work with most
“open-back” low-voltage installation brackets
and table boxes. It is compatible with most
standard North American Decora® wall-plates
(a white-colored wall-plate is included). It also
accommodates Gefen locking HDMI cables for
secure and reliable connections.
Features:
- Supports 300 MHz TMDS Clock and data throughput of up to 10.2 Gbps
- Automatic switching of 4K HDMI and VGA
- Manual switching of 4K HDMI and VGA via front panel button or RS-232
- VGA scaling up to 1920 x 1200 with picture adjustments
- Extend HDMI, VGA with analog audio, and RS-232 over a single CAT-5e:
- 4K Ultra HD (3840 x 2160 @ 60 Hz, 4:2:0), up to 130 feet/40 meters (8-bit color)
- 4K Ultra HD (3840 x 2160 @ 30 Hz, 4:4:4), up to 130 feet/40 meters (8-bit color)
- 4K Cinema (DCI) (4096 x 2160 @ 24 or 30 Hz 4:4:4), up to 130 feet/40 meters (8-bit color)
- 1080p Full HD (60 Hz) or WUXGA (1920x1200 @ 60 Hz), up to 230 feet/70 meters (up to 12-bit Deep Color)
- HDMI Features Supported:
- HDMI 2.0
- HDCP 1.4
- 12-bit Deep Color (at 1080p)
- LPCM 7.1, Dolby Atmos®, Dolby® TrueHD, DTS:X™, and DTS-HD Master Audio™ pass-through
- 3DTV pass-through
- CEC pass-through
- Lip Sync pass-through
- Analog L/R audio input for VGA
- RS-232 control of switching, scaler, and EDID management functions
- Bi-Directional RS-232 extension when used with a compatible Receiver
- Power over HDBaseT™ (POH) provides power to the Sender from a compatible Receiver over the link cable
- Sender can also be locally powered using the 2-pin Phoenix connector on back panel
- Uses Gefen’s implementation of HDBaseT™ technology with enhanced features
- Advanced EDID Management for rapid integration of source and display
- Field-updateable firmware via mini-USB port, using the Gefen Syner-G™ software
- North American standard 2-gang wall-plate form factor
- Works with most standard North American 2-gang Decora® wall-plates (white wall-plate is included)
- Works with most North American 2-gang table boxes and “open-back” low-voltage installation brackets
Specifications:
- Recommended Receiver: EXT-UHDA-HBTL-RX
- Maximum TMDS Clock: 300 MHz
- Total Signal Bandwidth/Data Rate: 10.2 Gbps
- Video Input Connector:
- (1) HDMI Type A 19-pin, female, locking
- (1) VGA HD-15, female
- L/R Analog Audio Input port:
- (1) 3.5mm mini-stereo jack
- Link Connector: (1) RJ-45, shielded
- RS-232 port: (1) 4-pin Phoenix
- DC In port: (1) 2-pin Phoenix
- Firmware Update port: (1) USB-Mini-B, female
- Power Indicator LED: (1) Blue
- Link Indicator LED: (1) Green
- HDCP Indicator LED: (1) Green
- HDMI Input Indicator LED: (1) Green
- VGA Input Indicator LED: (1) Green
- Auto-Manual Switch: (1) tact-type
- Power Requirement: Powered through POH from a compatible Receiver (recommended), or via the Phoenix connector on back panel, using a hard-wired 12V 1~2A DC power supply
- Recommended Power Supply (sold separately): EXT-PS121.5AIP-3P-6 (DC plug needs to be removed)
- Power Consumption: 6W maximum
- Operating Temperature: +32 to +122 °F (0 to +50 °C)
- Operating Humidity: 5% to 90% RH, non-condensing
- Storage Temperature: -4 to +185 °F (-20 to +85 °C)
- Storage Humidity: 0% to 95% RH, non-condensing
- MTBF: 50000 hours
- Overall Dimensions (W x H x D, not including the connectors): 3.5” x 4.2” x 1.74” (89mm x 104.5mm x 44mm)
- Mounting Cavity Dimensions (W x H x D, behind the mounting plate): 3.6” x 2.8” x 2” (92mm x 72mm x 50mm)
- Net Weight: 0.6 lbs (0.27 kg)
- Shipping Weight: TBD
Huomioi, että kuva on suuntaa-antava ja varsinainen tuote saattaa ulkoasultaan poiketa tuotekuvasta (esim. tietokoneisiin ei välttämättä sisälly näyttöä, vaikka kuvassa sellainen olisikin). Jos tuotenimikkeessä on eri tiedot kuin tuotekuvauksessa, tuotenimikkeen tieto on oikein. Jos jokin asia jää epäselväksi, lähetä sähköpostia tukeen ennen tuotteen tilaamista.