GEFEN AV over IP - 4K Ultra HD HDMI KVM over IP - Receiver Package

4K Ultra HD HDMI KVM over IP – Receiver Package

• Extends HDMI, USB, RS-232, 2-way analog audio, and IR, using a Gigabit Local Area Network
• Independent video, USB, RS-232, IR, and audio routing**
• Backward-compatible with first generation Gefen AV over IP products
• Supports input resolutions up to 4K 60Hz 4:2:0
• Supports output resolutions up to 4K 30Hz 4:4:4
• Supported HDMI Features:
• HDR
• HDCP 2.2 and 1.4
• Deep Color
• Lip-Sync
• Uncompressed LPCM digital audio up to 7.1 channels
• Up to 7.1 channels of HBR (High Bit Rate) digital audio including Dolby Atmos®, Dolby® TrueHD, DTS:X™, and DTS-HD Master Audio™
• When used with Gefen DVI-to-HDMI cables (not included), supports the use of DVI sources and DVI displays up to 1080p Full HD and 1920x1200 (WUXGA)
• Video output on Sender unit for local monitoring of the source
• KM Emulation feature facilitates real-time, simultaneous Keyboard and Mouse control of each source from all connected workstations
• Integrated scaler ensures maximum compatibility and best possible viewing experience with different contents and displays
• Built-in video wall controller accommodates any number of rows and columns up to 16x16
• Built-in Audio De-Embedder on Receiver breaks out 2 channel analog, 2 channel PCM, and up to 5.1 channels of Bitstream audio from the HDMI signal, allowing the audio content to be sent to external amplifiers and music distribution systems for added impact
• Mass-Firmware-Update, quick and automated configuration, and enhanced control capabilities and system security when used with the Gefen EXT-CU-LAN Matrix Controller
• Enhanced API for added functionality with third-party control systems
• Built-in web interface, Telnet, and UDP
• Compatible with the Gefen Keyboard Switching Controller software
• Supports 39,900 Senders and a combination of over 65,000 Sender and Receiver units, depending on the network bandwidth and number of ports on your network switch
• Two USB 2.0 ports with data rates up to 480 Mbps and backwardcompatibility with USB 1.1
• Two USB 1.1 ports with KM Emulation, for use with Human Interface Devices (H.I.D.)
• 802.3af standard Power-over-Ethernet allows the Sender and Receiver units to be powered through a standard PoE-enabled IP network switch, without the need for external power supplies
• Two-port Gigabit Ethernet switch built into the Receiver unit
• Mode switch on Sender for sharpness or motion-optimization of image
• Field-updatable firmware via EXT-CU-LAN controller or the built-in web server interface
• Locking power supply connectors
• Half-rack width Sender and Receiver enclosures are rackmountable using EXT-RACK-1U-GRY
• Sender and Receiver can also be surface-mounted using the included L-brackets
• Low profile Receiver enclosure features an IR Extender port and can be hidden away behind the display

• Video Input connector (Sender): (1) HDMI Type A 19-pin, female, locking
• Video Output connector (Sender): (1) HDMI Type A 19-pin, female, locking
• Video Output connector (Receiver): (1) HDMI Type A 19-pin, female, locking
• Line Input (Sender): (1) 3.5mm mini-stereo jack
• Line Output (Sender): (1) 3.5mm mini-stereo jack
• Mic Input (Receiver): (1) 3.5mm mini-stereo jack
• Headphones/Line Output (Receiver): (1) 3.5mm mini-stereo jack
• Optical Digital Audio Output (Receiver): (1) TOSLINK®
• USB Host Interface port (Sender): (1) USB Type B, female
• USB Device ports (Receiver):
  • (2) USB 2.0 Type A, female
  • (2) USB 1.1 Type A, female
• RS-232 port (Sender): (1) DB-9, female
• RS-232 port (Receiver): (1) DB-9, male
• IR Sensor (Receiver): (1) Located on front panel
• IR In/Ext (Sender/Receiver): (1) 3.5mm mini-stereo jack
• IR Out (Sender/Receiver): (1) 3.5mm mini-mono jack
• IR Extender type: EXT-RMT-EXTIRN
• Ethernet port (Sender): (1) RJ-45, shielded, PoE
• Ethernet ports (Receiver): (2) RJ-45, shielded, one with PoE
• Channel Up/USB-Request button (Receiver): (1) tact-type
• Channel Down button (Receiver): (1) tact-type
• Mode button (Sender): (1) tact-type, recessed
• Reset button (Sender/Receiver): (1) tact-type, recessed
• Program button (Sender/Receiver): (1) tact-type, recessed
• Program Select switch (Sender/Receiver): (1) slide-type, recessed
• Link Indicator (Sender/Receiver): (1) LED, green
• Power Indicator (Sender/Receiver): (1) LED, blue
• Power Supply jack (Sender/Receiver): 5V DC, 2.5mm pin and 5.5mm barrel, locking
• Power Requirement (Sender/Receiver): 5V DC, or PoE (802.3af standard)
• Power Consumption (maximum):
  • Sender: 7.2W
  • Receiver: 22W
• Operating Temperature (Sender/Receiver) +32 to +122°F (0 to +50°C)
• Operating Humidity (Sender/Receiver) 5% to 90% RH, non-condensing
• Storage Temperature (Sender/Receiver) -4 to +185°F (-20 to +85°C)
• Storage Humidity (Sender/Receiver) 0% to 95% RH, non-condensing
• MTBF:
  • Sender: 50000 hours
  • Receiver: 50000 hours
• Dimensions (W x H x D, without connectors or feet):
  • Sender: 8.4” x 1.7” x 5.9” (214mm x 43mm x 150mm)
  • Receiver: 8.4” x 1.0” x 5.9” (214mm x 25mm x 150mm)
• Unit Weight:
  • Sender:2.2 lbs. (1 kg)
  • Receiver: 2 lbs. (0.9 kg)
• Shipping Weight:
  • Sender: 4.2 lbs. (1.9 kg)
  • Receiver: 4.2 lbs. (1.9 kg)