DIGITAL PROJECTION TITAN Laser 47000 WUXGA

• HDMI 2.0 compliance for Side by Side, Frame Packing, Frame Sequential and TopBottom 3D Formats.
• DisplayPort 1.2 with HDCP 2.2 compliance.
• 10-bit colour processing (30-bits per pixel).
• Support for 1080p 24Hz native display.
• Support for 4K 4096 x 2160 resolution. Output will be scaled to WUXGA
• HDR support
• Input source automatically detected.
• Input redundancy mode with auto switching.
• Dual Pipe Processing: Two sources in parallel for Left and Right eyes.
• Syncronisation of active 3D glasses or polarising switcher.
• DICOM simulation mode.
• Sealed light engine

General Features

• Constant Brightness control
• Multi Projector brightness and colour control.
• Compatible with selected 3rd party lenses via lens converter
• Selectable EDID
• Custom Start-up Logo
• Smear Reduction (fast frame) (2D Only)
• Electronic PIC MUTE with selectable fade in/out timers
• On board 4 -line LCD display for at a glance status

Geometry Correction

• Vertical & Horizontal Keystone correction.
• Four Corner adjustment.
• Rotation.
• Pin/Barrel.
• Wall Corner adjustment.
• Centre Shift (Horizontal and Vertical linearity adjustment).
• Custom Warp.
• Upload of maps for warp, blend, uniformity and masking.
• Selectable aspect ratios: 5:4 / 4:3 / 16:10 /16:9 / 1.88 / 2.35 / TheaterScope / Source / Unscaled.
  
• Digital Zoom.
• Blanking control for custom input window sizing.

• Blending control available for all sides with width control.
• Correction for non-active pixels at the edge of the display.
• Electronic Black Level Compensation.
• Upload of Blend Maps including Blend, Uniformity, Masking, Pixel by Pixel

• Built in support for reception of uncompressed High Definition Video over standard CAT5e/6 LAN cable
• Allows projector to be placed up to 100m from source with low cost cabling
• Supports up to 4K 4096 x 2160@60Hz 4:2:0 or 4K 4096 x 2160@30Hz 4:2:2
• Includes Ethernet 100BaseT and RS232/IR control.

• Four colour modes available
• Powerful seven point colour correction for accurate colour matching with presets.
• Easy colour temperature selection
• Manual seven point colour adjustment
• Traditional lifts and gains

• Intuitive user interface for network control
• Simultaneous control of user-defined groups of projectors
• At-a-glance monitoring of projector status

• Real-time clock provides daily on/off automation
• E-mail alerts for system status

• 4 x eye bolts fitted for easy rigging.
• 4 x top stacking mounts and mount securing pins supplied as standard accessories.