CYP 4KUHD HDR HDMI over HDBaseT Transmitter with IR, RS232, PoH, Lan & ARC -
Hinnat näkyvät vain verkkokauppaan kirjautuneille käyttäjille.
|
CYP 4KUHD HDR HDMI over HDBaseT Transmitter with IR, RS232, PoH, Lan & ARC -
Tuotekoodi:
PUV-2100TX-AVLC
|
PUV-2100TX-AVLC 4KUHD HDR HDMI over HDBaseT Transmitter with IR, RS232, PoH, Lan & ARC
PUV-2100TX-AVLC
The PUV-2100TX-AVLC is a HDBaseT 2.0 Transmitter delivering 4K video with HDR and high bitrate audio over a single Cat.6a/7 cable at distances of up to 100m (328 feet). This Transmitter is compliant with the advanced HDCP 2.2 and HDMI 2.0 standards, as well as supporting the legacy HDCP 1.x and HDMI 1.x standards. Despite HDBaseT’s 10.2Gbps bandwidth limitation, 4K UHD HDMI video sources, up to and including 4K@60Hz (4:4:4, 8-bit) as well as 10/12-bit sources with HDR, are able to be processed and extended by the use of AVLC (Adaptive Visually Lossless Compression) when connected to a compatible AVLC Receiver or the INX-2100-AVLC Matrix Board. This transmitter can also pass RS-232, IR, Ethernet, and multiple audio streams across the same cable that carries the video signal.
The bi-directional optical audio feature allows optical audio to be exchanged bi-directionally between the Transmitter and Receiver. For added system stability, automatic HDBaseT clock stretching and TMDS re-clocking support is included on the PUV2100 series. The 48V PoH (Power over HDBaseT) feature allows a compatible connected Receiver to be powered directly by the Transmitter, eliminating the need for a separate power supply for the Receiver.
Features:
- HDMI with HDR, 3D & 4K@60Hz support, DVI 1.0 compatible
- HDCP 2.2 and HDCP 1.x compliant
- Supports up to 4K UHD (18Gbps, 4K@50/60Hz 4:4:4, 8-bit) video input and output
- Supports Deep Color input and output up to 12-bit
- Supports 10-bit and 12-bit HDR (High Dynamic Range) input/output
- Supports CEC bypass
- HDBaseT output transmits video, audio and data over a single Cat.5e/6/7 cable and can reach distances up to 100m/328ft at 4K when using Cat.6a/7
- HDBaseT feature support: HD Video and Audio, 100BaseT Ethernet, 48V PoH (PSE), bi-directional optical audio and Control
- (bi-directional IR/RS-232 pass-through)
- Integrated AVLC (Adaptive Visually Lossless Compression) activates when the bandwidth requirements of the source are beyond 10.2Gbps (340MHz) allowing for sources up to 18Gbps (600MHz) to be sent to a compatible Receiver with no loss of visual quality
- The AVLC feature allows manual selection between High Quality Mode (Full bandwidth) and Standard Mode (Lower bandwidth, useful for longer cable runs with 4K sources)
- Bi-directional optical audio extension support
- Supports HDMI DDC bus clock stretching for improved source compatibility
- Performs TMDS re-clocking and signal re-generation for improved signal integrity
- Supports standard 48V PoH from Transmitter to Receiver (compatible Receivers only)
Specifications:
Inputs
- 1x HDMI [1x HDMI Uncompressed AV and Data]
- 1x Toslink [1x Optical DTS / Dolby Digital / 2 Channel LPCM / ARC Output (Optical) / Dolby Digital Plus]
- 1x 3.5mm Stereo mini-jack [1x Infra Red Receiver]
- 1x 9pin Dsub [1x Bypass RS-232 Data]
- 1x RJ45 [1x LAN Serving]
- 1x USB 3 Type B [1x Service Port Power & Data]
Outputs
- 1x RJ45 [1x HDBaseT2 HDMI & Propriety Data]
- 1x Toslink [1x Optical DTS / Dolby Digital / 2 Channel LPCM / ARC Output (Optical) / Dolby Digital Plus]
- 1x 3.5mm Stereo mini-jack [1x Infra Red Emitter]
PSU:
Dimensions
- 231mm [W] x 108mm [D] x 25mm [H]
Net Weight
Gross Weight
Huomioi, että kuva on suuntaa-antava ja varsinainen tuote saattaa ulkoasultaan poiketa tuotekuvasta (esim. tietokoneisiin ei välttämättä sisälly näyttöä, vaikka kuvassa sellainen olisikin). Jos tuotenimikkeessä on eri tiedot kuin tuotekuvauksessa, tuotenimikkeen tieto on oikein. Jos jokin asia jää epäselväksi, lähetä sähköpostia tukeen ennen tuotteen tilaamista.